Service 1 – Visual Inspection
Visual Inspection:
A Trinitas Group certified mould technician will undertake a visual mould building inspection. The visual mould building inspection will consist of the following:
- A detailed visual inspection of the building
- Moisture readings,
- Infrared imaging,
- Temperature and humidity readings,
- Comprehensive report
Service 2 – Visual Inspection + Surface Sampling Visual Identification:
A Trinitas Group certified mould technician will undertake a visual mould building inspection. The visual mould building inspection will consist of the following:
- A detailed visual inspection of the building
- Moisture readings,
- Infrared imaging,
- Temperature and humidity readings,
- Comprehensive report
Surface Sampling
Surface Samples are taken which are then tested by an independent laboratory. The results determine the level of bacteria that is present and gives us a good indication on the dosage of the products to use for remediation. Includes 1x surface sample.
Service 3 – Visual Inspection + Surface Sampling + Airborne Sampling
A Trinitas Group certified mould technician will undertake a visual mould building inspection. The visual mould building inspection will consist of the following:
- A detailed visual inspection of the building
- Moisture readings,
- Infrared imaging,
- Temperature and humidity readings,
- Comprehensive report
Surface Sampling
Surface Samples are taken which are then tested by an independent laboratory. The results determine the level of bacteria that is present and gives us a good indication on the dosage of the products to use for remediation. Includes 1x surface sample.
Airborne Sampling
Air sampling tests the concentration of mould spores in the air. Samples are taken from the air and are later examined under a microscope by an independent laboratory
Inspection
Identifying the areas affected by mould
We inspect your home or office environment and test it using moisture meters, humidity readers, etc. Taking into account the air flow system, the building’s age and materials, the roofing and other construction features, we check dew points, air temperature and humidity, to detect the presence of mould.
A mould building inspection is completed in order to determine and put into place a process to eliminate the root cause of the mould growth – usually a water ingress problem from blocked or damaged drains and gutters, ineffective weather proofing, ground water from flooding, and so on.
Removal
Eliminating the mould from the affected areas
We use the latest technology to treat the contaminated walls, ceilings or floors. The infestation is removed from the hard surfaces. The process is then completed by the application of a special substance to remove the remaining mould spores that can still spread and cause health issues.
Protection
Destroying the mould spores completely
The spores are airborne and remain in the rooms even after the visible mould is removed. They must be thoroughly destroyed to stop the mould from returning in another room. To make sure that the spores are eradicated, we employ a procedure called fogging. A nontoxic decontamination substance is sprayed in all the rooms, creating a mist that spreads similarly to steam, for optimal coverage. The substance is biodegradable and safe for people and does not harm clothes or furniture.
Fogging will successfully eliminate spores and bacteria from the air and surfaces, preventing the reappearance of the mould.
